Schwed

Guttapercha Thermoplastic Plugs

Schwed Dent-O-Lux NanoFlow™ Guttapercha Plugs

FOR OBTURA™ STYLE OBTURATION SYSTEMS
Schwed Dent-O-Lux NanoFlow™ Guttapercha Plugs are especially formulated for use in today’s modern thermoplastic filling guns like the Obtura™. The plugs can be heated to just the right viscosity so that placement, condensing and backfilling are done quickly and easily.

Schwed NanoFlow™ Guttapercha Plugs are available in three formulations:

 

Regular Flow: Works well in most situations. It is ideal for back filling the canal. Use at 165-185 degrees C. Needle gauge 20G, 23G
plugs_body_imgb

 

Medium Flow: A mid-range flow that can be utilized with a smaller needle. This flow grade flows more easily that our Regular Flow so less pressure is needed.
plugs_body_imga

 

Easy Flow: Designed for use when obturating the entire canal. If used at the same temperature setting as our Regular Flow, it will flow far more easily. Alternatively, if used a lower temperature settings it will flow like the Regular Flow. Because it is used at a lower temperature, there will be significantly less shrinkage when it cools. This minimizes micro leakage at the apex. Use at 100-125 degrees C.

*OBTURA™ is a trademark of the Obtura Corporation.

plugs_body_imgc

 


Flowable Gutta Percha Pellet for OBTURA™ Like Extruding Devices

Recommended Work Temperature Setting & Needle Gauge Selection

REGULAR FLOW MEDIUM FLOW EASY FLOW
Temperature 165-185 degrees C 145-165 degrees C 100-125 degrees C
Needle Gauge 20G, 23G 20G, 23G 23G, 25G

124-02 Metropolitan Ave, Kew Gardens, NY 11415
Phone: 718.441.0526 | Fax: 718.441.4507 | Toll free: 800.847.4073
© 2010 Schwed Co. All Rights Reserved. Designed by 1st Source Web